Elmo Rietschle G-BH1e - Manual (Page 37)

© Gardner Denver Deutschland GmbH 37 / 52 610.44521.40.000
Commissioning
Code Possible settings IMPORTANT
No. Designation Manu-
facturer Selection
C0010 Minimum output
frequency
10,00 0,00 {0,02 Hz} 650,00 C0010 only limits the analog input 1
  Only valid for units 2BH.−..N.1−.
and 2BH.−..N.3−.with integrated
2FCxxxx−1NE00 inverter C0011 Maximum output
frequency
86,00 7,50 {0,02 Hz} 650,00 Maximum permissible value: 86
(5000/min)
  Only valid for units 2BH.−..N.1−.
and 2BH.−..N.3−.with integrated
2FCxxxx−1NE00 inverter
10,00 Setting for units up to 5.5 kW
25,00 Setting for 7.5 kW unit
C0012 Acceleration time
main setpoint
0,00 {0,02 s} 1300,00 Reference: frequency change 0 Hz ...
C0011
  Only valid for units 2BH.−..N.1−.
and 2BH.−..N.3−.with integrated
2FCxxxx−1NE00 inverter
10,00 Setting for units up to 5.5 kW
20,00 Setting for 7.5 kW unit
C0013 Deceleration time
main setpoint
0,00 {0,02 s} 1300,00 Reference: frequency change 0 Hz ...
C0011
  Only valid for units 2BH.−..N.1−.
and 2BH.−..N.3−.with integrated
2FCxxxx−1NE00 inverter
52,70 Setting for units 2BH.−..N.3−.
90,90 Setting for units 2BH.−..N.1−.
C0015 U/f−rated
frequency
7,50 {0,02 Hz} 960,00
] [ *
] [
] [
] [ 0015 Hz f
V U
V U
Hz C r
r
N 
 U
N
= mains rated voltage of
inverter
 U
r
= rated voltage of motor
depending on connection method
acc. to rating plate
 f
r
= rated frequency of motor acc.
To rating plate
The setting applies to the entire
mains voltage range in which the
inverter may be operated.
C0016 U
min
boost (starting
voltage
 0,00 {0,01 %} 40,00  Depends on the device
Load−independent rise of motor
voltage at low speeds:
 Reference: rated voltage of motor
(C0090).
 The setting applies to the entire
mains voltage range in which the
inverter may be operated.