Avision AM7100NF User Manual - Manual (Page 186)

179
Scanning From A Touch Of The Start Button
1. Place the original document face down on the flatbed glass and align it in the
upper-left corner.
2. Press the Scan button to enter scan mode.
3. The LCD-display displays the following Scan To message. Press the arrow
buttons to select your desired destination application, for example, Microsoft
Paint.
Scan To 3-Paint
Press W X, Start
4. Press Start on the product to start scanning.
5. After the scanning is finished, the designated application will be launched and
the scanned image appears in the main window of the designated application
(For example, Microsoft Paint) as below.