Avision AM7100NF User Manual - Manual (Page 89)

82
Faxing Your Scanned Document
Important!
Before faxing your document through the MFP, make sure that you have
installed a telephone line on the MFP. Refer to Chapter 2 on how to
connect a telephone line.
Basic Operation
Using the default settings
1. Place your document(s) with text FACE UP in the ADF or FACE DOWN on
the glass.
2. Press the Fax button on the control panel.
3. Enter the fax number with the numeric keypad on the control panel.
4. Press the Start button to send your document(s).
Note:
9 If you make a mistake during the process, press the Stop button on the
control panel to cancel the operation.
9 If you make a mistake while entering a number or name, press the left
arrow button to delete the last digit or character. Then enter the correct
number or character
9 When entering a phone number from the numeric keypad, include any
PSTN access number (number to access the public telephone line, usually a
9 or 0), area codes, and the telephone number.
9 If you need to enter the PSTN access number, be sure to press the Pause
button after entering the PSTN access number to make the access number
work. For example, enter an access code and then press the Pause
button before entering the telephone number. A "，" appears on the display
to indicate when a pause is entered.
9 Up to 20 characters can be entered in the Fax Number field.
Normal STD.
8853452344