Selecting paper tray – Avision AM7100NF User Manual User Manual
Page 80
Advertising
73
Selecting Paper Tray
In normal operation, you do not need to select paper tray. Paper will be copied
from the default tray. However, if you wish to use another tray, for example,
the manual tray, you can select the paper tray on the control panel.
To select paper tray,
1.
Place your document either on the flatbed glass or into the ADF input tray.
2.
Press the Input Tray button repeatedly until your desired tray location LED
is lit. Default is tray 1.
3.
Press the green Start button. Copy is starting.
Advertising