Burkert Type 8644 - Manual (Page 116)

112 - 8644/phoenix
S
YSTEM
D
ESCRIPTION
Basic electronic module ME02 / 2-fold monostable
Construction
A basic electronic module consists of a distributor module (back-wall bus) and a function module. Both
modules are contacted via a 14-pole board-to-board connector.
Possible combinations with valve types
Connection configuration of valve connector
1 2 3
Function display of LEDs
green LED
Display of the modul status (only 1. valve position)
yellow LED
display of the switched position
no function
1 Valve +
2 Not connected
3 Valve - (not GND)
Basic module type
Add-on
dimension
Valve
positions
Valve type Function
ME02 2-fold
monostable
11 mm 2
6524 3/2-way
6525 5/2-way
Technical data ME02 / 2-fold monostable
Dimensions WxHxD 22x70,5x52 mm
Weight 38 g
Storage temperature -20 to +60° C
Rated voltage under load DC 24 V
No. of valve outputs 2
Current consumption per valve position during switching 43 mA
Current consumption per valve position after ca. 65 ms 26 mA
Current consumption from the back-wall bus max. 15 mA
Display of valve status
1 yellow LED per valve
position
Display of modul status
1 green LED per modul
(1.valve position)
Power dissipation of module in moment of switching 2 W
Power dissipation of module 65 ms after switching
procedure (2x 0.25W at resistors, 2x 0.25W at valve coils)
1 W