Burkert Type 8644 - Manual (Page 130)

A2 - 8644/phoenix
A
PPENDIX
EC DECLARATION OF CONFORMITY
Bürkert Werke GmbH & Co. KG hereby declares as the manufacturer that these products comply with
the requirements listed in the Guidelines of the Council for Harmonization of the Regulation of the
Member States.
in respect of electromagnetic compatibility (89/336/EEC)
and are stipulated for devices and protective systems for intended use in potentially explosive zones
(ATEX, 94/9EC).
For the assessment of the products in respect of electromagnetic compatibility, the following standards
were applied:
EN 61000-6-4: 08/02 Basic engineering standard for interference emission;
Part 2: Industrial domain
EN 61000-6-2: 08/02 Basic engineering standard for interference resistance;
Part 2: Industrial domain
For the assessment of the products in respect of ATEX, the following standards were applied:
EN 50014: 02/00 Electrical equipment for potentially explosive zones,
General regulations
EN 50021: 02/00 Electrical equipment for potentially explosive zones,
Ignition protection type 2N2:
The EC Design Inspection Certificate PTB 02 ATEX 2048 was issued and the production audited
(CE0102) by the
Physikalisch Technischen Bundesanstalt
Bundesallee 100
D-38116 Braunschweig
NOTE Design Inspection Certificate PTB 02 ATEX 2048 is to be found in the Appendix.
For temperature classes and electrical data see "Technical data".