Document Outline

• General Information and Safety Instructions
  • 1. Operating Instructions
  • 2. Intended Use
  • 3. Basic safety instructions
  • 4. General Information
• System Description
  • 1. General Description
  • 2. Technical Data
  • 3. System Accessories
• Configuration and Function
  • 1. Configuration
  • 2. Function
• Configuration and Function of the Modules
  • 1. Supply Segments
  • 2. Valve segments
  • 3. Pneumatic Connector Module
  • 4. Basic Pneumatic Module
  • 5. Terminal module
  • 6. Electronic Module
  • 7. Valve that can be integrated
• Installation
  • 1. Safety Instructions
  • 2. Installation Instructions
  • 3. Installation on S7 Profile Rail (Pre-assembled System)
  • 4. Installation in the control cabinet
  • 5. Configuration, Conversion and Expansion of an existing system with individual segments
  • 6. Removal / Installation of individual Segments
  • 7. Removal / Installation of the Cover flaps
  • 8. Replacing a terminal or pneumatic module
  • 9. Replacing a valve
  • 10. Connection of the Air Inlet and Exhaust Lines
• Commissioning
  • 1. Safety Instructions
  • 2. Initialization
  • 3. SD Card / System Serialization Data
• Maintenance and Repair
  • 1. Safety Instructions
  • 2. Maintenance
  • 3. Maintenance
• Storage, Packaging, Transport, Disposal
  • 1. Storage
  • 2. Packaging, Transport
• Annex
  • 1. EC Declaration of Conformity
  • 2. EC-Type Examination Certificate Terminal modules
  • 3. IEC-Ex Certificate of Conformity Terminal modules
  • 4. EC-Type Examination Certificate Electronic modules
  • 5. IEC-Ex Certificate of Conformity Electronic modules
  • 6. EC-Type-Examination certificate 11 mm-Valves Type 6104
  • 7. IEC-Ex Certificate of Conformity 11 mm-Valves Type 6104
  • 8. EC-Type-Examination Certifcate 16,5 mm-Valves Type 6106
  • 9. IEC-Ex Certificate of Conformity 16,5 mm-Valves Type 6106
  • 10. EC-Type-Examintation Certificate 11 mm-Valves Type 6144
  • 11. IEC-Ex Certificate of Conformity 11 mm-Valves Type 6144
• 1. Operating Instructions
  • 1.1. Symbols
• 2. Intended Use
  • 2.1. Restrictions
• 3. Basic safety instructions
• 4. General Information
  • 4.1. Contact address
  • 4.2. Warranty
  • 4.3. Approvals
  • 4.4. Information on the Internet
  • 4.5. Trademarks
• 1. General Description
  • 1.1. Product Description
  • 1.2. Characteristic Features and Benefits
  • 1.3. Field of Application
  • 1.4. Marking
• 2. Technical Data
  • 2.1. General Technical Data
  • 2.2. Dimensions
• 3. System Accessories
• 1. Configuration
  • 1.1. Maximum System Configuration
  • 1.2. Configurator
  • 1.3. Siemens SIMATIC ET 200iSP System Components
  • 1.4. Bürkert AirLINE Ex - System Components
• 2. Function
  • 2.1. View of the Overall System
  • 2.2. Functional representation of the AirLINE Ex-system
• 1. Supply Segments
  • 1.1. Configuration and function
  • 1.2. Technical Data
  • 1.3. Pneumatic Connections
  • 1.4. Displays
  • 1.5. Spare parts
• 2. Valve segments
  • 2.1. Configuration and Function
  • 2.2. Technical Data
  • 2.3. Pneumatic Connections
  • 2.4. Displays
  • 2.5. Channel Assignment
  • 2.6. Diagnosis (Electronic Module)
  • 2.7. Accessory
  • 2.8. Spare parts
• 3. Pneumatic Connector Module
  • 3.1. Configuration and Function
  • 3.2. Technical Data
  • 3.3. Pneumatic Connections
• 4. Basic Pneumatic Module
  • 4.1. Configuration and Function
  • 4.2. Technical Data
  • 4.3. Pneumatic Connections
  • 4.4. Accessory
• 5. Terminal module
  • 5.1. Configuration and Function
  • 5.2. Marking
  • 5.3. Technical Data
• 6. Electronic Module
  • 6.1. Configuration and Function
  • 6.2. Marking
  • 6.3. Technical Data
  • 6.4. Displays
  • 6.5. Diagnosis
  • 6.6. Spare Parts
• 7. Valve that can be integrated
  • 7.1. Pneumatic Valves Type 6524/6525 (station width 11 mm)
  • 7.2. Pneumatic Valves Types 6526/6527 (station width 16.5 mm)
• 1. Safety Instructions
• 2. Installation Instructions
  • 2.1. Unpacking pre-assembled systems
  • 2.2. Installation Tools and Torques
  • 2.3. Position of the Assemblies
• 3. Installation on S7 Profile Rail (Pre-assembled System)
  • 3.1. Removing a System from a Profile Rail
  • 3.2. Installation/Removal of the ET 200iSP-Modules
• 4. Installation in the control cabinet
• 5. Configuration, Conversion and Expansion of an existing system with individual segments
  • 5.1. System Configuration
  • 5.2. Conversion and Expansion
  • 5.3. Assembly
• 6. Removal / Installation of individual Segments
  • 6.1. Removal
  • 6.2. Installation
• 7. Removal / Installation of the Cover flaps
  • 7.1. Installation
  • 7.2. Removal
• 8. Replacing a terminal or pneumatic module
• 9. Replacing a valve
  • 9.1. Installation instructions
  • 9.2. Installation
• 10. Connection of the Air Inlet and Exhaust Lines
  • 10.1. Connection of the Pressure Supply
  • 10.2. Connection of the Exhaust Air
  • 10.3. Pilot Exhaust Air / Auxiliary Control Air
  • 10.4. Plug to Block P-channel
• 1. Safety Instructions
• 2. Initialization
  • 2.1. Communication Connection
    • 2.2. Configuration of the Hardware Using Siemens Step7
    • 2.3. Access to the Acyclic Parameters with the Siemens PDM
    • 2.4. Example with Two Different Function Modules
    • 2.5. Acyclic Parameters of the AirLINE Ex Modules
    • 2.6. Use of “HSP” and “SUP” under Siemens Step7 / PCS7
    • 2.7. Software Update Package (SUP) for PCS7
• 3. SD Card / System Serialization Data
  • 3.1. Serialization Data Record
• 1. EC Declaration of Conformity
  • 1.1. Standards used for CSA-, FM-Ex and IEC-Ex-certification
  • 1.2. Set-Up of the Type 8650 System for Certification Conformity
  • 1.3. Certificates
• 2. EC-Type Examination Certificate Terminal modules
• 3. IEC-Ex Certificate of Conformity Terminal modules
• 4. EC-Type Examination Certificate Electronic modules
• 5. IEC-Ex Certificate of Conformity Electronic modules
• 6. EC-Type-Examination certificate 11 mm-Valves Type 6104
• 7. IEC-Ex Certificate of Conformity 11 mm-Valves Type 6104
• 8. EC-Type-Examination Certifcate 16,5 mm-Valves Type 6106
• 9. IEC-Ex Certificate of Conformity 16,5 mm-Valves Type 6106
• 10. EC-Type-Examintation Certificate 11 mm-Valves Type 6144
• 11. IEC-Ex Certificate of Conformity 11 mm-Valves Type 6144