Burkert Type 8624 - Manual (Page 13)

8624-2 Standard - 11
english
M12 (4-pole): Supply voltage and standard signal for setpoint
Configuration:
1 24 V DC output
3 GND
4 Standard signal input, sensor
* wire colours when using standard cables with M8 plug
(3pole)
1 (brown)* 4 (black)
3 (blue)
2 (white)
Configuration
1 24 V DC supply voltage
2 Standard signal input, external setpoint
3 GND external setpoint
4 GND supply voltage
* wire colours when using standard cables with M12 plug
(4polig)
M8 (3-pole) Standard signal input, sensor
1 (brown)
4 (black)
3 (blue)*
ATTENTION!
Do not connect a voltage to pin 1 of the 3-pole plug! Pin 1 is a
24 V output to supply the sensor (e.g. 2-conductor
transmitter)
5.3 Connection configuration of flow pressure controller
type 8624-2
Fig.: Connections on flow pressure controller type 8624-2
M12, 4-pole
Supply voltage
and
standard signal input
External setpoint
M8, 3-pole
Standard signal input
Sensor