Burkert Type 8624 - Manual (Page 21)

8624-2 Standard - 19
english
6.6 Configuration mode
NOTE
STANDARD
MODE
press key for 5 sec
CONFIGURATION
MODE
MENU
.
.
.
END
press
key
Fig.: Switching over from standard to configuration mode
Values that are changed within the configuration mode only
become active when this mode is left in the menu item
END by
pressing the key or after switching the device off and on
again.
In the configuration mode, the settings on the controller can be adapted to the
current application. The control process continues to run in the background with
the previously active parameters.