English, 2 indications on the display – Burkert Type 8624 User Manual
Page 16
14 - 8624-2 Standard
english
6.2
Indications on the display
Fig.: 4-digit text display, e.g. of pressure unit in bar or psi
4-digit display
to indicate the process
values and parameters
Manual
mode
Indication of specified setpoint value
- internal setpoint (no display)
- external setpoint (1)
- setpoint via bus (1)
4-digit text display, e.g.
of pressure unit in bar or
psi
NOTE
•
After the supply voltage is switched on, the controller is in
the standard mode.
•
Change to the other modes is possible by the actions
shown in the figure.
•
After the configuration mode is ended, the parameters set
are transferred to the memory of the controller.
•
After the operating voltage is switched off, the parameters
last active are stored; on next switching on again, these will
be active again.
Bus active