English, 4 mode - setting the setpoint mode – Burkert Type 8624 User Manual
Page 27
8624-2 Standard - 25
english
6.6.4
MODE - setting the setpoint mode
internal
setpoint
external
setpoint
Î Select here whether the device shall work with internal or
external setpoint. The choice
External Setpoint is shown by
the number “1” in the lower display line.
(factory setting: external setpoint
1
Setting the setpoint: internal setpoint
With internal setpoint setting, the setpoint value for the controlled variable is
entered in the previously set unit and stored. The device controls to this value.
Settings are possible within the values of the sensor scaling(see 6.6.3)
(factory setting: 00.00).
The unit corresponds to the value set in the menu item
UNIT.
increase digit
next digit
Fig.: Setting the setpoint: internal setpoint
Fig.: Setting the setpoint mode