Clear-Com Concert for Newsroom - Manual (Page 35)

35 Administrator Guide
To associate a conference with a channel (Channel Associations):
1. Do either of the following:

In the Conference page (Conference Table) locate a conference (for example, Product
Engineering 1). In Action, click the Name of the conference.

Click the information pages [ ] for that conference, located under the Conference
page (Conference Table).
2. Click the Channel Associations tab.
3. The Channel Associations page is displayed, listing all the channels in the partition. Make any
changes you require to the permissions granted to particular channels.
4. Click Submit.
5.6 Client channels
Partition > [Named partition] > Client channels [ ] displays the Client channels page (Channel
Table) in the right-hand pane. All the channels available to Concert users are listed.
Client channels are used exclusively by Concert Clients to bring external audio sources into Concert,
such as 4-wire audio from an Eclipse Frame or music broadcast by a radio station.
Tip: You can also access the Client channels page (Channel Table) by clicking the Channel Table icon [
] located under the Channels icon [ ].
5.6.1 Adding channels
To add a channel:
1. In either Client Channel or Server Channel, type the name of the channel (for example,
Program Feed).
2. Optional: In the Description, type a brief description of the channel
(for example, Event feed from the main mixing board).
3. In Key name, type the abbreviated display name shown on Eclipse panel keys
(for example, Progm_Feed).
4. Click [add].