A&D Weighing Indicator AD-4405 - Manual (Page 10)

Page 8 AD-4405 Weighing Indicator
4. 4. 4. 4. Description of Panels and symbols Description of Panels and symbols Description of Panels and symbols Description of Panels and symbols
4.1.1. Front Panel Description
N
o.
Name Description
1 STABLE Indicates when the display is stable.
2 NET Indicates when the display is the net weight.
3 ZERO Indicates when the display weight is in the Zero range.
4 Annunciator lndicates various weighing status or functional selection.
PT Indicates when PRESET TARE value is being used.
READY Indicates the state of comparison or batching.
M+ (Accumulation) Indicates when there is a result of addition or accumulation.
1,2,3(Triangle) Depending on the function selected, Indicates various states.
5 MAIN display Displays the weight, accumulation data or setting parameters.
6 UNIT part Unit used to weigh.
7 HI/OK/LO Indicates the results of comparison.
8 Capacity label Capacity and division (this label is included in the accessories).
9 Key switches Selects the display, settings or data output.
CODE key The key to select the code memory.
SAMPLE key The key to set the unit weight for the counting function.
SETPOINT key The key to set the comparator value.
PT key The key to set the PRESET TARE value.
TOTAL key The key to display the total weight.
M+ key The key to display the total weight.
START key The key to start comparison / batch weighing.
STOP key The key to stop comparison / batch weighing.
FEED key The key to feed the paper of the optional Built-in Printer.
MODE key The key to switch unit used to weigh.
0 – 9 key The key to input any numerical settings.
A – F key Used to enter setting values (press NET/GROSS key at a time).
2
1
3
4
5 6 7
8
9
10
4. Description of Panels and symbols