E-Mon Energy Software - Manual (Page 118)

Customer
E-Mon Energy User Manual 11-5 E-MON
Adding a Billing Device
To add a Billing Device:
6 Check the Bill Devices that applies to the customer. Uncheck devices that do not apply to
the customer.
7 To add a Bill Device, click on the A
DD
button and the Customer Bill Devices window
opens.
Figure 11.5 - Customer Bill Devices Dialog
8 From the Customer Bill Device Directory, right click and drill down to the actual device.
9 Click and select the device you want to add.
10 Click OK. The device now displays in the Bill Devices list box.
Figure 11.6 - Bill Devices
11 To assign the device to the customer, ensure the check box next to the device is checked.
The device is now added to the customer.
12 To delete a device from the list box, click on the one you want to delete. Click the D
ELETE
button.
13 Click on the “√ ” button to accept/save the customer record.