E-Mon Energy Software - Manual (Page 63)

Group and Location
E-Mon Energy User Manual 7-6 E-MON
Figure 7.5 - Group Tab
3 In the Number field, type a Group Number.
Note: Must be a unique number between 1 and 32767. This field is required.
4 In the Name field, type a Group Name. This field is not required; however, we highly
recommend you provide a meaningful name up to 12 characters in length.
5 You may want to set other fields, such as AMR Schedule (Call-in or Call-out), Security,
Load Control, Recorder Parameters, Billing, and Auto Billing Cycle.
6 At this point, you can click on the “√ ”button to accept/save the group record or continue to
complete the remaining fields.
Updating the Device Explorer
7 Every time you add a new group, location, recorder, or meter, click the D
EVICE E XPLORER
button, to update the device directory. Note: You will notice that the Group number and
Group name have been added to the device directory.
Selecting the AMR Schedule Call–In (If using with Group Option)
To select an AMR Schedule Call-In:
8 From the AMR Schedule (Call-In) group fields, select Schedule Name, Task, and Server
from each drop-down list for only Schedule 1. Note: If you created and saved an AMR
schedule, Task, and Server, it should appear in the drop-down list. Refer to “AMR” tab for
details. The Event Server is not available.
9 Check the “Enable AMR” box.