E-Mon Energy Software - Manual (Page 18)

Section 3
System and Software Installation
E-Mon Energy User Manual 3-1 E-MON
How Do I Install and Startup E-Mon Energy™ Software?
Before installing and setting up the software, you should check and verify that all system and site requirements have
been met. It is recommended that any hard installations, such as wiring, communications, and other devices, be
installed. If your system requires generating bills, you may also want to obtain the rates and schedules from your
local utility.
Within the Appendix section of this manual, we do provide you with a “Startup Checklist and Forms” that we
recommend completing, signing, and returning (via mail or fax) prior to E-Mon final transaction and startup.
Note: The initial installation of E-Mon Energy software is often performed by an
authorized E-Mon representative.
With completion of system and hardware requirements, you are now ready to install and start up the E-Mon Energy
application.
Installing E-Mon Energy
To install E-Mon Energy:
1 Power system up and log into Windows 2000 or Windows XP.
Type User Name
Type Password
Click OK.
2 Obtain E-Mon Energy CDROM that came with your software package.
3 Insert the CD-ROM into the CD-ROM drive and close the door. The system should
automatically boot the CD-ROM and the Install Shield Self-extracting EXE dialog box will
open.
Figure 3. 1 - Install Shield Self-Extracting EXE
The Setup window will begin processing the Install Shield.
Figure 3.2 - Setup Dialog
A Wizard opens to welcome you to the E-Mon Energy Setup program.