E-Mon Energy Software - Manual (Page 183)

Billing and Reports
E-Mon Energy User Manual 18-8 E-MON
Meter Report (also Print Meter\Recorder Report). The save feature allows you to save the file as a Formula One VTS
spreadsheet and open it in MS Excel. The following is a brief description of the two reports.
• Recorder Report – Saves the results on the status of the recorder and meters and, provides version/date,
time, flags, and profile status.
• Meter Report – Saves the results on the status of the meters, readings, and flags.
The other two reports reside on the Database Access window under the Report Tab. These two reports are the
Automatic Meter Reading (AMR) Calls
Report and the Interval Data Recorder (IDR) Gap Report. These reports are
saved and printed the same way as the Reports and Meters reports, except that the spread is displayed on the panel
window after processing. The following is a brief description of the two reports.
• AMR Calls Report – Saves the results on selected groups, locations, and the recorders for Profile Start
and End Date\Time, Last Call, Last Initialize, and Total Initialize.
• IDR Gap Report – Saves the results on selected locations and recorders, which record the gaps of
electricity consumption interval data. Results show the Oldest to the Newest Gap, Total, and Last
Convert. Depending on the size of the system and the type of report, the program may take several
minutes to complete the report.
Here are examples of all four reports:
Figure 18.8 - Recorder Report
Note: In the Recorder Report illustration above Meter 1 is “bad” this is a Flag.