E-Mon Energy Software - Manual (Page 134)

Other Features
E-Mon Energy User Manual 13-3 E-MON
Recorder
The Recorder feature allows the user to set up global parameters for the Sampling Rate, Peak Demand
Interval, Rolling Demand window, and the Demand Synchronized Window. For additional information, see
the section on Recorders within this manual.
Figure 13.2 - Recorder Parameters
Panel Group/Field Description
Recorder Parameters Panel Group
Name* Type in a unique name to identify your Recorder Parameters. The
name can be up to 20 characters. This is a required field. This name
will be referenced in the Group and/or Location tabs of the Database
window.
Description Type in a description to identify the Recorder Parameters.
Profile Interval Select the profile interval of 5-Minute or 15-minute. This sets the
sampling rate for the recorder. The sampling rate will affect the
number of days that can be stored inside the recorder. When the
storage is used up, the recorder will flush out the oldest data on a day
block basis. This is also known as FIFO (first-in-first-out).
Peak Demand Select the Peak Demand window of 15-minute, 30-minute, or 60-
minute. This selection will affect the calculation for peak demand.
Rolling Demand Select the Rolling Demand window of 5-minute, 15-minute, or Reset
at EOI. This selection will affect the calculation for peak demand.
Note: The Rolling Demand window cannot be less than the Profile
Interval.
End of Interval Select the End of Interval signal using Built-in Clock or External
Clock. Note: Some hardware does not support an External Clock.
Time Adjustment Select Time Adjustment for synchronizing the recorder/meter clock
with the PC clock. When the time is within this range, E-Mon
Energy™ will set the recorder/meter clock to the same time as the PC.