E-Mon Energy Software - Manual (Page 84)

Recorder
E-Mon Energy User Manual 8-7 E-MON
What is the Access Window?
The Access window is the doorway to connecting to the location’s hardware. The Access window is divided into
groups – Function, Hardware to Access, and Connection Control. The Function and Hardware to Access groups are
available when you’re online with the location. Click the Connect button to start the connection. For additional
information on the access, window and functions, refer to the Access Functions and Hardware Group section.
Figure 8.8 - Access Group Window Description
How do I scan for the Recorder?
Once the connection to the recorder is on-line, scanning the recorders and meters is the first thing you will do at start-
up or when adding a new recorder or meter(s). From the Access window, selecting the Setup Hardware radio button
will display the Scan Recorder button. If a new recorder is added, select All Possible, then click on the Scan
Recorder
button. This sends a command to the Recorder and Meters to verify their functional states. The recorders
and meters respond back to the system and the Access window opens a status table response. See illustration below.
For complete steps, refer to Scanning Recorder and Meters within this section.
Figure 8.9 - Scan Recorder Button