Allied Telesis AT-WA1104G-10 - Manual (Page 10)

Features in 291-08 10
Version 291-10
C613-10488-00 REV G
CR00007178 RIPng 2 The following issues occurred with RIPng:
■ RIPng dropped requests from peers with non link-local addresses.
■ for a solicited response, if the routes did not exist on the device, RIPng
returned a metric of 0 for them instead of returning a metric of 16
■ RIPng performed split-horizon checking for solicited responses
■ RIPng used the link-local address to respond to all requests, even if the
request used a non link-local address and therefore the reply should
have also used a non link-local address
These issues have been resolved.
Y Y Y Y Y Y - - Y Y Y
CR00008847 Install, MIB 2 Previously, the MIB objects configFile and createConfigFile would return the
current configuration file, and the MIB object currentConfigFile would
return 'no such object'.
This issue has been resolved. The objects configFile and createConfigFile
now return the boot configuration file. The object currentConfigFile now
returns the current configuration file.
Y Y Y Y Y Y Y Y Y Y Y
CR00009473 Classifier 2 The output of the show classifier=number command did not show the
protocol number.
This issue has been resolved.
Y Y Y Y Y Y Y Y Y Y Y
CR00010654 Firewall 2 When adding a firewall application rule, it was possible to specify FTP as the
application but not specify the command parameter. This meant that the
rule would allow all FTP commands through, even if action=deny had
been specified.
This issue has been resolved by making the command parameter
mandatory when the application is specified as FTP.
Y Y Y Y Y Y - - - - Y
CR00010951 PPP 2 If the router or switch received an LCP packet with an unrecognised code,
it responded with a CodeReject packet of incorrect length that did not
respect the established MRU of the peer.
This issue has been resolved.
Y Y Y Y Y Y - - Y Y Y
CR Module Level Description AR4
00
AR7
x5
AR7
x0S
Rap
ier i
Rap
ier w
AT
-8800
A
T-8
600
A
T-8
700
XL
x900
-48
A
T-
99
00
A
T-9
800