Allied Telesis AT-WA1104G-10 - Manual (Page 57)

Features in 291-05 57
Version 291-10
C613-10488-00 REV G
CR00016459 Core - This enhancement disables CPU fan monitoring on AT-8948 switches. Monitoring
the fan is unnecessary unless an accelerator card is installed on the switch, so
disabling monitoring reduces the number of messages that the switch displays
and logs.
To enable monitoring, use the command:
enable cpufanmonitoring
To disable it again, use the command:
disable cpufanmonitoring
When monitoring is enabled, the command show system displays the CPU fan
status in the entry labelled “Main fan”.
- - - - - - - Y - -
CR00016523 SNMP - This enhancement enables you to specify whether SNMP adds 0x00 padding
when the most significant 9 bits of an object’s value are all 1, or whether the
encoding follows the ASN.01 BER rule, which cuts off the most significant byte
of 0xff. This setting has an impact on all integer type MIB objects, including 32
bit and 64 bit counter objects.
To add the padding, use the command:
set snmp asnberpadding={on|yes|true}
For examples, see “SNMP ASN.01 BER Padding—CR00016523” on page 99 .
Y Y Y Y Y Y Y Y Y Y
CR Module Level Description AR4
00
AR7
x5
AR7
x0S
Rap
ier i
AT
-8800
A
T-8
600
A
T-8
700
XL
x900
-48
A
T-
99
00
A
T-9
800