Allied Telesis AT-WA1104G-10 User Manual
Page 44
Features in 291-05
44
Version 291-10
C613-10488-00 REV G
CR00016489
BGP
2
When BGP capability matching was changed to strict, that setting was not
displayed in output of the command show config dyn or saved in the
configuration file produced by the command create config. When the router or
switch ran the configuration file on start-up, the capability matching setting
reverted to the default of loose.
This issue has been resolved.
Y
Y
Y
Y
Y
-
-
Y
Y
Y
CR00016526
PPP
2
An interoperability issue with a malfunctioning PPP peer meant that the peer
could ACK an IP address of 0.0.0.0 when it was required to offer a valid public IP
address.
This issue has been resolved. The router or switch now refuses to accept this
incorrect negotiation and instead resends a configure request for an IP address.
Y
Y
Y
Y
Y
-
-
Y
Y
Y
CR00016576
IPv6
2
The router or switch sometimes rebooted after receiving an IPv6 router
advertisement, or after the command set ipv6 interface was entered.
This issue has been resolved.
Y
Y
Y
Y
Y
-
-
Y
Y
Y
CR00016621
Switch
2
On 48-port switches, hardware filters with the eport parameter specified did not
always behave correctly.
This issue has been resolved.
-
-
-
Y
Y
Y
Y
-
-
-
CR00016698
BGP
2
The following issues occurred when using BGP aggregate specifications (created
using the command add bgp aggregate):
■
When an aggregate route was originated from routes learnt from external
peers, and then all of the contributing child routes were withdrawn by the
external peers, the aggregate route was not removed from the routing table.
It could still be advertised to external peers.
■
When a network or import entry (add bgp network or add bgp import)
resulted in a route entry that had the same prefix length as the aggregate
specification, then BGP (correctly) originated the aggregate route. However,
deleting the network or import definition did not remove the aggregate route
from the routing table.
These issues have been resolved.
Y
Y
Y
Y
Y
-
-
Y
Y
Y
CR
Module
Level
Description
AR4
00
AR7
x5
AR7
x0S
Rap
ier i
AT
-8800
A
T-8
600
A
T-8
700
XL
x900
-48
A
T-
99
00
A
T-9
800