Allied Telesis AT-WA1104G-10 - Manual (Page 24)

Features in 291-08 24
Version 291-10
C613-10488-00 REV G
CR00008122 TTY 3 When prompted to enter a file name while using the command line file
editing utility, no more than 23 characters could be typed, even if the
existing characters were deleted using the backspace key.
This issue has been resolved.
Y Y Y Y Y Y Y Y Y Y Y
CR00008378 Firewall 3 The command enable firewall notify=port port=asyn-number was not
available on switches, only on routers. If a user created a configuration on
a router and used this option, the configuration had to be modified if
transferred to a switch.
This issue has been resolved. The notify=port option and the port
parameter are now available on switches. However, these port parameters
have been deprecated in favour of the asyn parameters, so warning
messages are printed to indicate this if the commands are used.
- - - Y Y Y - - - - Y
CR00009086 Switching 3 When the commands enable switch port=number automdi and
disable switch port=number automdi were executed from a telnet
session, some INFO messages were output to the asyn0 console session
instead of the telnet session.
This issue has been resolved.
- - - - - - - - Y Y -
CR00010144 STP, SNMP 3 Previously, newRoot and topologychange traps (located at
1.3.6.1.2.1.17.0) were only generated by the bridging module.
This has been extended to the STP module. Please note that this applies
only to standard STP, not Rapid STP.
- - - Y Y Y Y Y Y Y Y
CR00010229 Install, SNMP 3 Previously, MIB objects instRelMajor, instRelMinor and instRelInterim values
were only correct for bootrom (default) builds.
This issue has been resolved. Now the correct values are returned for these
objects when the current install matches the temporary or preferred install.
Y Y Y Y Y Y Y Y Y Y Y
CR Module Level Description AR4
00
AR7
x5
AR7
x0S
Rap
ier i
Rap
ier w
AT
-8800
A
T-8
600
A
T-8
700
XL
x900
-48
A
T-
99
00
A
T-9
800