Allied Telesis AT-WA1104G-10 User Manual
Page 68
Features in 291-04
68
Version 291-10
C613-10488-00 REV G
CR00010136
IP Gateway
3
If an IP interface was added and deleted many times, an excessive number of
memory buffers became full.
Also, when an IP interface was deleted, the IGMP query timer (set ip igmp
int=interface querytimeout=value) sometimes continued running and later
caused the router or switch to reboot.
These issues have been resolved.
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
CR00012230
IP Gateway
3
When running the boot ROM release, it was possible to configure the router or
switch as a DHCP client by using the command add ip interface=int ip=dhcp.
However, the boot ROM release does not include the DHCP client feature, so the
router or switch did not receive an IP address via DHCP.
This issue has been resolved. It is no longer possible to configure the router or
switch as a DHCP client when running the boot ROM release.
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
CR00012493
IP Gateway,
IGMP Proxy
3
Where IGMP proxy is enabled, only one upstream interface may be defined.
Previously, when the command add ip interface=int ip=ipadd
igmpproxy=upstream was used to try to create a second upstream interface,
an error message was correctly displayed. However, the interface was still added,
using igmpproxy=off.
This issue has been resolved. The second interface is no longer added if this error
occurs.
Also, if an interface had been set as the upstream interface and was later
changed to a downstream interface, a different upstream interface could not be
specified, even though there was no active upstream interface.
This issue has been resolved.
Y
Y
Y
Y
Y
Y
Y
Y
Y
–
CR
Module
Level
Description
AR4
00
AR7
x5
AR7
x0S
Rap
ier i
AT
-8800
A
T-8
600
A
T-8
700
XL
x900
-48
A
T-
99
00
A
T-9
800