IDEC DATAVS2 Series - Manual (Page 18)

SVS2 Series Instruction Manual
13
As you search for and select connected sensors, the control panel
displays sensor name, IP address and subnet mask set previously and
indicates whether a connection can be created using these settings, so
you can enable connection to the desired sensor.
Once you have selected the sensor, the control panel lets you set the
shooting parameters for the sensor, choose illuminator mode and select
your reference image.
When configuring the controls, the control panel shows their key
features, so they can be modified and checked in real time.
This is what the control panel looks like during the test stage: you will be
asked to configure sensor outputs, load the image to be used for testing
and then start the test process running all controls on that image.