IDEC DATAVS2 Series - Manual (Page 25)

Instruction Manual SVS2 Series
20
6.2.1. Off-Line Mode
The control panel is activated:
you need to define the "Reference Image". This may be done by loading an existing image stored
previously (button "Load Image"):
When you press the "Open" button, the image is displayed in the work area, while its thumbview is
shown in the Images Buffer. You may load more than one image and then choose whichever seems
best. As images are loaded, their thumbs are added to the Images Buffer and you may switch from
one image to the next by simply clicking the thumbs. Once you have selected your reference image,
click the "Set Reference Image" button to confirm. You may now proceed to STEP 2: the label turns
red and the pull-down menus for trigger, control and locator selection become active.