Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 14)

WaveSurfer MXs-B Oscilloscopes
6 922172-00 Rev A
Software
Find out the oscilloscope's software and hardware configuration by
choosing Utilities → Status from the menu bar.
Adding a New Option
New software options can be added after purchasing a code and then
enabling the option on the oscilloscope. Call Teledyne LeCroy Customer
Support to place an order and receive the code.
Restarting the Application
Upon initial power-up, the oscilloscope loads the instrument application
software automatically.

If you exit the application and want to reload it, touch the shortcut icon
on the desktop:

If you minimize the application, touch the desktop icon to maximize it:
Rebooting the Oscilloscope
If you need to restart the Windows® operating system, you must reboot
the oscilloscope by pressing the power switch, and then turning the power
back on after a ten-second wait.
Windows
®
License Agreement
Teledyne LeCroy's agreement with Microsoft prohibits users from running
software on Teledyne LeCroy oscilloscopes that is not relevant to
measuring, analyzing, or documenting waveforms.