Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 9)

Getting Started Manual
922172-00 Rev A 1
Welcome
Thank you for purchasing a Teledyne LeCroy product. This Operator's
Manual includes important safety and installation information for your
WaveSurfer Oscilloscope, along with operating procedures for capturing,
viewing, and analyzing waveforms.
This WaveSurfer Manual is organized in the following manner:
 Hardware (physical features) and Basic Controls
 Viewing Waveforms, includes instructions on setting up the Display
 Vertical and Horizontal Settings, Sampling Modes, and Triggering
 Analyzing Waveforms using parameter Measurements, Math
functions, and Reference Waveforms
 Saving and Recalling oscilloscope setups, waveforms, .CSV files, and
waveform images. This section also provides procedures to recall
factory settings.
 Reference section including certification and contact information.
When oscilloscope is delivered, verify that all items on the packing list or
invoice copy have been shipped to you. Contact your nearest Teledyne
LeCroy customer service center or national distributor if anything is missing
or damaged. If you do not contact us immediately, we cannot be
responsible for replacement. Contact us for support if you have any
difficulties using the product. You can also refer to additional support
materials at teledynelecroy.com.
We truly hope these materials provide increased comprehension when
using Teledyne LeCroy's fine products.
Sincerely,
David C. Graef
Teledyne LeCroy
Vice President and Chief Technology Officer