Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 95)

Getting Started Manual
922172-00 Rev A 87
4. Create Label Text by using the pop-up keyboard. You may also
change Horizontal Position of each label, Remove Label, and turn
labels on/off by checking or un-checking the View Labels checkbox.
Saving Data Files and Images
You can save raw data files by selecting File  Save Waveform and then
choosing data format, locations, etc. before finally choosing Save Now.
Images can be saved by choosing File in Utilities, Hardcopy, selecting a File
Format, File Name, Directory location, etc.), and then pressing the Print
icon in the dialog or on the front panel.
Please refer to the Saving the Screen Image to a File topic for more
information.
Once saved (on a USB memory stick, USB storage device, or oscilloscope
hard drive), the image file can be easily cut and paste into other programs,
like Word, Excel, Paint, etc.
Creating Reference Waveforms (Memories)
If you wish to compare a waveform to another waveform, you can save
them into Memories. Up to 4 memories can be stored in non-volatile RAM
at a time. You can display all 4 memories at once, if desired.
If you wish to store more than 4 waveforms at a time, you can Save
Waveform Data (accessed from the File menu), and then Recall Waveform
Data (also accessed from the File menu) into a Memory trace.
Reference the chapter on Saving and Recalling Signals for more
information.