Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 84)

WaveSurfer MXs-B Oscilloscopes
76 922172-00 Rev A
Using Memory Toolbar Shortcuts
These toolbar shortcuts can be used to perform specific actions for the
Memory Traces.
Opens a Measurement selection pop-up menu. You can then
select a parameter (measurement) for the Memory trace
from this menu without leaving the Memory Setup dialog.
The parameter automatically appears below the grid.
Clears the memory of the stored trace.
Opens a Labeling pop-up menu that allows you to create
labels tied to the memory.
Saving and Recalling Waveform Data
Saving Waveform Data
1. Choose File  Save Waveform from the
menu bar.
2. Choose to save the Waveform Data to a File
3. Choose a source of the data that you want to
save, and choose a file name for the data file.
CAUTION. If you use a name that ends in
a number instead of a letter, the
instrument may truncate the number. This is
because, by design, the first waveform is
automatically numbered 0, the second 1, etc.