Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 75)

Getting Started Manual
922172-00 Rev A 67
Setting up a Math Trace
1. Press the Math front panel button
Or, touch Math  Math Setup… from the Menu Bar.
The following dialog is shown on the lower display with the Math trace
ON and the last selected Math Operator chosen as the current
operator.
2. Change the currently defined Operator by touching either the icon or
inside the Operator area to bring up the following pop-up menu (if you
ordered the MathSurfer Advanced Math option, you would have more
selections than shown):