Measurement, Measurement mode – Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual User Manual
Page 66
Advertising
WaveSurfer MXs-B Oscilloscopes
58
922172-00 Rev A
Measurement Mode
This search and scan mode lets you apply filters to your acquisitions to
highlight only the features of interest. Post-acquisition, you can apply
other
filters
to the acquisition, or make different parameter measurements on it.
For example, in this acquisition a Rise time (10-90%) parameter
measurement is applied to fast edges during acquisition. We are interested
only in edges with a rise time slower than 37 ns. Therefore, the Greater
Than filter method is selected, with a value of 37 ns; four edges pass during
acquisition:
Advertising