Chapter 8: recording options, 1 setting recording options, Chapter 8 – Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual User Manual
Page 107: Recording options
Advertising
PETracer EML User Manual
Chapter 8: Recording Options
LeCroy Corporation
99
Chapter 8: Recording Options
8.1 Setting Recording Options
The Recording Options dialog is used to configure a recording.
To open the Recording Options window, click
or select the command
Setup > Recording Options.
Note: There are separate sets of Recording Options for each Analyzer type. To set
the Analyzer type, select the appropriate platform from the Target Analyzer
menu in the General page of the Recording Options.
Figure 1: PETracer EML in Simple Mode:
Advertising