7 generating traffic: prepare traffic generation – Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual User Manual
Page 217
Advertising
PETracer EML User Manual
Chapter 10: Traffic Generation
LeCroy Corporation
209
10.7 Generating Traffic: Prepare Traffic Generation
To prepare for traffic generation, follow these steps:
Step 1 If it is not running, start the PETracer™ software.
Step 2 Open an existing script file or create a new script. For example, open the
traffic generation file Linkup.peg by selecting File > Open from the
menu. The following packets display in the main window.
The CATC Trace window shows the type of traffic that is to be generated in the
current generation session.
Step 3 If needed, make changes to the script file,
then save the file by clicking the Save button
.
Advertising