Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 120)

Chapter 8: Recording Options PETracer EML User Manual
112
LeCroy Corporation
8.4 Recording Rules Buttons
The Recording Rules toolbar allows you to create and edit recording rules:
8.5 Creating Recording Rules
The Recording Rules page is used to set triggers and filters. To access this page, select
Setup > Recording Options > Recording Rules.
There are three steps to creating a recording rule:
1) Select events.
2) Place the events in the Global State or Sequence cells.
3) Assign actions to the events.
Note: There are limits to the types of rules that can be created. See “Recording
Rule Limits” on page 115 for details.
New Event. Opens a
drop-down menu with a list of
events. Zoom in
Delete. Delete selected
event. Zoom out
Undo. Undoes last action. Show/Hide Channels.
Shows/hides the channel
buttons.
Redo. Undoes last Undo
command. Show properties. 
Opens the Properties dialog
box for the selected item.