Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 137)

PETracer EML User Manual Chapter 8: Recording Options
LeCroy Corporation
129
How to Set a Counter
To set a counter:
Step 1 Open the Recording Rules page, select an event, and drag it to the
Global State or Sequence cells. For details on these steps, see
“Creating Recording Rules” on page 112.
Step 2 Counts can only be set on a per channel basis, so press the Up or Down
channel buttons to select the channel on which the count is performed.
Step 3 Right-click the selected event and select Add Counter from the menu to
open the Properties dialog.
Step 4 In the text box to the right of the label Count enter a value. Make sure
the checkbox to the left of the word Count is checked.
Step 5 Click the X in the top right corner of the dialog box to close the dialog. A
counter button should appear just below your selected event.