Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 40)

Chapter 3: Installation PETracer EML User Manual
32
LeCroy Corporation
3.5 Browsing to a Networked Analyzer
For the PETracer EML and the PETrainer EML, you can browse to a networked analyzer.
To browse to a networked Analyzer:
Step 1 From the menu, select Setup > Analyzer Network. The Analyzer
Network dialog box opens. Locally connected Analyzers (connected via
USB) display in the list. The list may also show PC hosts and Analyzers
identified in previous sessions.
Step 2 If the desired host and Analyzer are not present in the list, click Add. The
Add Analyzer dialog box opens.
Step 3 Browse to the PC host that has the Analyzer(s), then click Select. The
selected host and its Analyzer appear in the Analyzer Network browse
dialog.


Note: The Analyzer must be turned on before it appears in the list.
Step 4 Remove hosts and Analyzers you do not intend to use in the current
recording session by selecting them from the list and clicking Remove.
The PETracer software establishes a connection to the selected Analyzer.