Traffic generation toolbar – Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual User Manual
Page 56
Advertising
Chapter 4: Software Overview
PETracer EML User Manual
48
LeCroy Corporation
Traffic Generation Toolbar
These buttons appear on the status bar at the bottom of the screen if a PETrainer™
Exerciser is attached. The buttons are explained below.
Start traffic generation
Resume traffic generation.
Stop traffic generation
Trainer Connect. Attempts to establish a G1
connection between PETrainer and the DUT.
Trainer Disconnect. Breaks the connection
between PETrainer and the DUT.
Read Address Space
Uploads information currently held
in the Exerciser memory space.
Write Address Space
Downloads information into Exerciser memory.
Advertising