Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 24)

Chapter 2: Hardware Description PETracer EML User Manual
16
LeCroy Corporation
2.7 PETrainer EML Exerciser LED Descriptions
When powered on, the PETrainer EML activates the user-accessible controls and LEDs
on the front and rear panels of the UPAS.
Warning! Do not open the UPAS enclosure. There are no operator serviceable parts
inside. Refer servicing to LeCroy.
UPAS LEDs (from left to right)
(a) Power indicator LED for UPAS: Lights when the unit power is switched on.
(b) System Status indicator LED for UPAS: Lights during initialization/power up of UPAS
base unit. Blinks if a self-test fails.
(c) Manual Trigger push-button: Disabled. On PETracer EML, this button forces an
event trigger.
(d) Triggered LED: Disabled. On PETracer EML, this LED lights when the Analyzer
triggers on an event.
(e) Slot 1 Status: Disabled. On PETracer EML, this LED illuminates when the Analyzer
in Slot 1 is recording.
(f) Slot 2 Status: Disabled. On PETracer EML, this LED illuminates when the Analyzer
in Slot 2 is recording.