Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual User Manual
Page 112
Advertising
Teledyne LeCroy
NVME Drive Emulation in Ubuntu Linux 13.10 and Linuxv3.1‐rc4
112
Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual
15. To create the drive: Sudo fdisk /dev/nvme0n1. Once the command is issued you will
be prompted to create the new drive. Select default versions and ensure that the
disk is writable.
16. To create a partition : sudo mkfs.ext4 /dev/nvme0n1 and select default options.
17. Once this is done you can start using read/write commands to read and write to this
drive
Advertising