Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 47)

Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual 47
Generation Options Dialogs Overview Teledyne LeCroy
TABLE 4.2: Link Generation Option Parameters
Parameter Values Default Description
Enable Automatic SKIP Generation
Enable
Automatic
SKIP
Generation Skip Timer in
symbols
Gen 3 in blocks
1360
370
Periodic timer that controls sending of SKIP
ordered sets at specific intervals. The
timer’s value is measured in number of
symbols for Gen1/Gen2 and in 130 bit
blocks for Gen3.
Disable Auto
TX Presets Disables auto transmit preset values
FTSCount 0 to 255 255 Number of FTS ordered sets required (as
sent in TS)
Link Training Parameters
Gen3
Specification
version 0.7, Oct 09
0.7, Jun 09
0.71 Spec
1.0 Spec 1.0 Spec Both versions of the specification are
supported so you can choose either of
them.
Skip
Equalization
in Link
Training The Summit Z3‐16 will skip all equalization
stages during Gen3 training.
Skip EQ in
Training
Phase 2, 3 The Summit Z3‐16 will skip phase 2 and 3
equalization stages during Gen3 training.
Enable
Autonomous
Speed
Change Enables Autonomous Speed change
support.
Disable Auto
Tx Presets Disables Autonomous Speed change
support.