Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 41)

Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual 41
Creating a Traffic Generation File Teledyne LeCroy
4.6 Creating a Traffic Generation File
There are four ways to create a traffic generation script file:
 Export an existing trace to a script file
 Save an existing script to a new file
 Select File > New to create a new and empty script file that contains no text.
 Create an empty file using an OS shell (with .peg extension) and open it with
PETracer software.
4.6.1 Exporting a CATC Trace to a Traffic Generation File
A simple way to create a script file is to open a CATC Trace and then to export the
CATC Trace data to a generation file:
1. Open a CATC Trace file.
2. Select File > Export > to Generator File Format.
3. Select the desired options from the File Export dialog box as shown below.
Figure 4.8: File Export As Generator Format Dialog
Direction
Selects the direction of the traffic to be exported.
From and To
Selects a range for exporting. You can export all or part of the CATC Trace.
Do not export hidden packets
Ignores any packets hidden through the various hide options.