Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 93)

Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual 93
Using StoreData in Device Mode for Z3 Scripting Teledyne LeCroy
Figure 7.3: Generation Options - Transactions Tab
7. Edit the address mapping as required and save the configuration.
8. Write the Configuration Space file to the Summit Z3 Exerciser as shown below.
Figure 7.4: Writing Configuration Space File
9. Run the MemRd script with StoreData and the completion payload will move to the
local Summit Z3 memory (see Figure 7.5 on page 94 ).