3 bars setup – Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual User Manual
Page 85
Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual
85
Launching the Configuration Space Editor
Teledyne LeCroy
Alternatively, after selecting a register, you can modify the register in the Field View in the
right column.
The Field View allows you to override field attributes. By default, attributes are assigned
according to the specification. The available options are:
RO: Read Only
RW: Read‐Write
RW1C: Write‐1‐to‐Clear
Figure 6.5: Field View
6.2.3
BARs Setup
The BARs Setup dialog helps set up Base Address Registers. It provides a more convenient
way of defining BARs than setting up the BARs manually. In addition, it provides the
mapping of BARs to PETrainer and Summit Z3‐16 memory regions.
To open the BARs Setup, select Edit > BARs Setup.
Figure 6.6: BARs Setup Dialog