Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual User Manual
Page 92
Advertising
Teledyne LeCroy
Using StoreData in Device Mode for Z3 Scripting
92
Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual
Figure 7.2: Generation Options - Transactions Tab
4. You need to have a configuration space file ready before setup to map the BAR
correctly to the PETrainer Memory Region. Save the config.bin in an appropriate
folder.
5. Select Tools > Configuration Space Editor, to open the Configuration Space Editor
dialog (see
Figure 7.3 on page 93
).
6. Click Edit > BARs Setup... to display the BARs Setup dialog (see
Figure 7.3 on
page 93
).
Advertising