10 low power – Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual User Manual
Page 63
Advertising
Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual
63
Generation Options Dialogs Overview
Teledyne LeCroy
4.7.10
Low Power
Select from the following options:
L1 State Settings
Modes
ASPM (Active State Power Management)
PCIPM
Enable L1
L1 Sub States
Disable
Select L1_1 or L1_2
Send PM ACKs in response to L1 ASPM requests (Host Emulation mode only)
Enter a value for PM Ack/Nak Count (Host Emulation mode only)
Note:
L1 sub states are enabled only for Z3 Trainers with CLKREQ# support.
Figure 4.22: Generations Options Low Power Dialog
Advertising