Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 75)

Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual 75
Chapter 5
Macros
5.1 Macros
You can add buttons to the Status bar at the bottom of the window (and add commands to
the Generate menu) to run traffic generation macros on the Exerciser.
After a macro script has been defined and assigned to a button the on the Status bar, the
macro can be run by clicking the macro button with the mouse or selecting the macro
name from the Generate menu.
5.1.1 Default Macros: Connect and Disconnect
By default, the PETracer™ software includes two macros, Connect and Disconnect. These
buttons execute macros for creating and breaking a connection between the Exerciser and
a DUT.
The buttons are on the Status bar when Exerciser hardware is present. The commands are
also on the Generate menu: