Extron Electronics SSP 7.1 User Guide - Manual (Page 4)

Conventions Used in this Guide
Notifications the following are used:
DANGER: Danger indicates a situation that will result in death or severe
injury. For example:
DANGER: Severe Electric Shock. Disconnect power to this
furnishing before cleaning.
WARNING: A warning indicates a situation that has the potential to result in death or
severe injury. For example:
WARNING: May result in Electric Shock. Devices used in this furnishing
should be connected to a properly grounded outlet only (see Grounding
Instructions in the device manual).
CAUTION: A caution indications a situation that may result in minor injury.
ATTENTION: Attention indicates a situation that may damage or destroy the product
or associated equipment. For example:
ATTENTION: Potential Damage to Property. The opening in the table
should be cut only by licensed and bonded craftspeople. Exercise care to
prevent scarring or damaging the furniture.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE
}
NOTE: For commands and examples of computer or device responses mentioned
in this guide, the character “0” is used for the number zero and “O”
represents the capital letter “o.”
Computer responses and directory paths that do not have variables are written in the
font shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New .
Click the OK button.