Extron Electronics SSP 7.1 User Guide - Manual (Page 97)

Command ASCII Command
(host to unit) Response
(unit to host) Additional Description
Listening Mode Preference for each Mode Override Group
Set listening mode
preference for each mode
override group
E U X! * X3* * X4!
SSP }
SspU X! * X3* * X4!] Sets the listening mode preference for
each mode override group.
View listening mode
preference for each mode
override group E U X! * X3* SSP } SspU X! * X3* * X4!] Displays the current listening mode
preference for each mode override
group.
Mono Source Setting (for Analog input #5 only)
Set mono source to left
channel
E N1SSP } SspN X1)] Sets mono source:
X1) — Mono source
1 = Left
2 = Right
3 = Left + Right (default)
Set mono source to right
channel E N2SSP } SspN X1)]
Set mono source to left +
right channel E N3SSP } SspN X1)]
View current mono
source E NSSP } SspN X1)] Shows the current mono source setting.
Analog Input Gain Adjustment (for Analog Input #5 only)
Set analog input gain
level
E A X( SSP } SspA X(] Sets the analog input gain level:
X( — Input gain
0 to +24 dB in 1 dB steps (default = 0)
View current analog input
gain level E ASSP } SspA X(] Displays the current analog input gain
Enable/Disable Parametric EQ Filter Bypass for each Output Channel
Enable bypass
E E X@ * X4$ *0SSE } SseE X@ * X4$ * X#] X# — Status
0 = Off (default)
1 = On
X4$ — Parametric EQ filter selection (1
to 9).
1 is the lowest frequency range
9 is the highest frequency
Disable bypass E E X@ * X4$ *1SSE } SseE X@ * X4$ * X#]
View current bypass
status E E X@ * X4$ *SSE } SseE X@ * X4$ * X#]
NOTE: X!
Input (1-5): 1 and 2 = Digital audio, optical input; 3 and 4 = Digital audio, coaxial input; 5 = Analog input
X3*
— Mode Override Group: 0 = No Mode Override (no LEDs on); 1 = Multichannel Downmix (DOWNMIX);
2 = Dolby Pro Logic II/IIx ( PL II/IIx); 3 = DTS Neo:6 (DTS NEO:6); 4 = To All (TO ALL)
X4!
— Mode Override Group Listening Mode Options: 1 = Stereo (DOWNMIX); 2 = Mono (DOWNMIX);
3 = Dolby Pro Logic II/IIx Movie ( PL II/IIx); 4 = Dolby Pro Logic II/IIx Music ( PL II/IIx); 5 = DTS Neo:6 Cinema (DTS NEO:6);
6 = DTS Neo:6 Music (DTS NEO:6); 7 = Stereo to All (TO ALL); 8 = Mono to All (TO ALL))
SSP 7.1 • SIS Commands 91