Extron Electronics SSP 7.1 User Guide User Manual

Page 94

Advertising
background image

Command

ASCII Command
(host to unit)

Response
(unit to host)

Additional Description

Crossover Frequency Setting
Specify crossover
frequency

E

F

X1&

SSP

}

SspF

X1&]

X1&

— Crossover frequency 1 - 20

(default = 11; equivalent to 100 Hz)

1-9 = 40-80 Hz in 5 Hz increments

9-16 = 80-150 Hz in 10 Hz increments

16-20 = 150-250 Hz in 25 Hz
increments

View crossover frequency

E

FSSP

}

SspF

X1&]

View low frequency filter status

Volume Adjustment
Specify volume

X^

V

Vol

X^]

X^

— Volume adjustment 0 (-100 dB) to

100 (0 dB) in 1 dB steps:
Default = 50.
Max volume (no attenuation) = 100;
Min volume (full attenuation) = 0

The response to this command always has a three-digit number and, if necessary, includes leading 0s.
Example:

50V

Vol050

]

Leading 0 for the response but not for
the command.

Increment volume

+V

Vol

X^]

Increments volume in 1 dB steps.

Decrement volume

-V

Vol

X^]

Decrements volume in 1 dB steps.

View volume setting

V

Vol

X^]

View the current volume setting.

Bass Adjustment
Specify bass level

E

B

X%

SSP

}

SspB

X%]

Sets the bass level.

X%

= -10 to +10 dB in 1 dB increments

(default = 0)

View bass level setting

E

BSSP

}

SspB

X%]

View the current bass level setting.

Treble Adjustment
Specify treble level

E

T

X%

SSP

}

SspT

X%]

Sets the treble level.

X%

= -10 to +10 dB in 1 dB increments

(default = 0)

View treble level setting

E

TSSP

}

SspT

X%]

View the current treble level setting.

Volume Output Mode
Set audio output mode to
variable

E

O1SSP

}

SspO

X$]

Sets audio output mode to variable.

X$

— Audio output mode

0 = Fixed

1 = Variable (default)

Set audio output mode
to fixed

E

O0SSP

}

SspO

X$]

View current audio
output mode status

E

OSSP

}

SspO

X$]

View the current audio output mode
setting.

Front Panel Lockout (Executive Mode)
Lock front panel

1X

Exe

X#]

Locks front panel.

X#

— Status: 0 = Off (default); 1 = On

Unlock front panel

0X

Exe

X#]

Unlocks front panel

View current lockout
status

X

Exe

X#]

Displays current front panel lockout
status.

SSP 7.1 • SIS Commands

88

Advertising